Difference between revisions of "CZ19"
m |
|||
Line 1: | Line 1: | ||
=Intro= | =Intro= | ||
− | =Hardware | + | =Getting started= |
+ | Plug in your battery. Positive terminal points towards the USB connector. | ||
+ | |||
+ | =Launcher= | ||
+ | ==Brightness control== | ||
+ | Left and Right control the brightness. Save your eyes and also improve your charging time by lowering the brightness. | ||
+ | |||
+ | ==Wifi Settings== | ||
+ | The badge is preconfigured for the Campzone wifi, SSID 'CampZone-IoT' Pass 'CampZone-IoT'. If you want to use the badge at home, do the OverTheAir Update on the campsite so the WiFi settings app works without bugs ;) | ||
+ | |||
+ | To configure from the terminal, open a Serial terminal (115200) and choose 'python shell'. | ||
+ | |||
+ | import machine | ||
+ | machine.nvs_setstr("system", "wifi.ssid", "YOUR SSID HERE") | ||
+ | machine.nvs_setstr("system", "wifi.password", "YOUR PASSWORD HERE") | ||
+ | |||
+ | If you use a SSID without a password, then erase the wifi password setting: | ||
+ | |||
+ | import machine | ||
+ | machine.nvs_erase("system", "wifi.password") | ||
+ | |||
+ | Reboot and it should 'just work' (if you have done the OTA). Else make an accesspoint with the CampZone-IoT as SSID and Password, do the OTA and THEN use your badge properly. | ||
+ | |||
+ | =Hardware mods= | ||
+ | ==Capacitor for operation without battery== | ||
The I-Pane is a bit dodgy without the battery on just USB. To remedy this, you can solder in a capacitor which is included in your bag. Please note the capacitor is polarized, the negative terminal (short wire, white marking on capacitor) should point towards the Campzone/Deloitte logo. | The I-Pane is a bit dodgy without the battery on just USB. To remedy this, you can solder in a capacitor which is included in your bag. Please note the capacitor is polarized, the negative terminal (short wire, white marking on capacitor) should point towards the Campzone/Deloitte logo. | ||
Line 8: | Line 32: | ||
[[File:IMG 3886.jpeg|200px]] [[File:IMG 3887.jpeg|200px]] | [[File:IMG 3886.jpeg|200px]] [[File:IMG 3887.jpeg|200px]] | ||
− | + | ==Ultra bright LEDs== | |
− | + | Replace 6 resistors and burn your eyes even further. More details soon! | |
− | == | ||
− |
Revision as of 22:16, 20 July 2019
Contents
Intro
Getting started
Plug in your battery. Positive terminal points towards the USB connector.
Launcher
Brightness control
Left and Right control the brightness. Save your eyes and also improve your charging time by lowering the brightness.
Wifi Settings
The badge is preconfigured for the Campzone wifi, SSID 'CampZone-IoT' Pass 'CampZone-IoT'. If you want to use the badge at home, do the OverTheAir Update on the campsite so the WiFi settings app works without bugs ;)
To configure from the terminal, open a Serial terminal (115200) and choose 'python shell'.
import machine machine.nvs_setstr("system", "wifi.ssid", "YOUR SSID HERE") machine.nvs_setstr("system", "wifi.password", "YOUR PASSWORD HERE")
If you use a SSID without a password, then erase the wifi password setting:
import machine machine.nvs_erase("system", "wifi.password")
Reboot and it should 'just work' (if you have done the OTA). Else make an accesspoint with the CampZone-IoT as SSID and Password, do the OTA and THEN use your badge properly.
Hardware mods
Capacitor for operation without battery
The I-Pane is a bit dodgy without the battery on just USB. To remedy this, you can solder in a capacitor which is included in your bag. Please note the capacitor is polarized, the negative terminal (short wire, white marking on capacitor) should point towards the Campzone/Deloitte logo.
- Before you begin, unplug USB cable and remove battery.
- Bend and cut the leads and solder in place.
Ultra bright LEDs
Replace 6 resistors and burn your eyes even further. More details soon!