Difference between revisions of "SHA2017Badge/Documentation/Assembly"
Jump to navigation
Jump to search
(Created page with "800px|frameless|center|Badge flyer front 800px|frameless|center|Badge flyer back") |
|||
(One intermediate revision by the same user not shown) | |||
Line 1: | Line 1: | ||
+ | At SHA2017 a nice flyer (see below) was supplied in the bag that contained the badge and components. | ||
+ | |||
+ | If you managed to get hold of a never used (prestine) badge after SHA2017 you need to do some magic to get things going: | ||
+ | |||
+ | == WiFi setup == | ||
+ | If you want to be able to follow the instructions on the flyer and re-create the full SHA2017 experience, setup a WiFi network with these characteristics: | ||
+ | * SSID: <code>SHA2017-insecure</code> | ||
+ | * no security options - just an open network | ||
+ | |||
+ | == OTA upgrade == | ||
+ | The first thing to do after starting up the badge for the first time is do an [[OTA]] (Over The Air) update. | ||
+ | This will make a connection with the [[hatchery]] and download the latest available version of the badge software. | ||
+ | |||
+ | After doing the OTA upgrade you can proceed with [[SHA2017Badge/Documentation/First_boot]]. | ||
+ | |||
+ | == Original Flyer == | ||
[[File:Flyer badge 2 1.png|800px|frameless|center|Badge flyer front]] | [[File:Flyer badge 2 1.png|800px|frameless|center|Badge flyer front]] | ||
[[File:Flyer badge 2 2.png|800px|frameless|center|Badge flyer back]] | [[File:Flyer badge 2 2.png|800px|frameless|center|Badge flyer back]] |
Latest revision as of 18:38, 22 February 2019
At SHA2017 a nice flyer (see below) was supplied in the bag that contained the badge and components.
If you managed to get hold of a never used (prestine) badge after SHA2017 you need to do some magic to get things going:
WiFi setup[edit]
If you want to be able to follow the instructions on the flyer and re-create the full SHA2017 experience, setup a WiFi network with these characteristics:
- SSID:
SHA2017-insecure
- no security options - just an open network
OTA upgrade[edit]
The first thing to do after starting up the badge for the first time is do an OTA (Over The Air) update. This will make a connection with the hatchery and download the latest available version of the badge software.
After doing the OTA upgrade you can proceed with SHA2017Badge/Documentation/First_boot.