Difference between revisions of "Hh2019sweatshop"

From Badge team
Jump to navigation Jump to search
 
(3 intermediate revisions by one other user not shown)
Line 17: Line 17:
 
* Bef0re + 1
 
* Bef0re + 1
 
* JanHenrik
 
* JanHenrik
 +
* Stegen
  
 
=Stations=
 
=Stations=
==Unpacking==
+
{{SweatshopItem|Title=Unpacking
*Requirements: Empty SAMLA for ESD bags, tray for boards
+
|Procedure=
*What comes in: SAMLA boxes with badge-panels
+
|Requirements=* Empty SAMLA for ESD bags
*What comes out: loose badge-panels on trays -> Soldering station, bags -> Bagging station
+
* tray for boards
 +
|In=* SAMLA boxes with badge-panels
 +
|Out=* loose badge-panels on trays -> Soldering station,  
 +
* <span style="green">bags -> Bagging station</span>
 +
}}
  
==Soldering AudioJacks==
+
{{SweatshopItem|Title=Soldering AudioJacks
Audiojacks are not properly soldered, so we'll fix them.
+
|Subtitle=Audiojacks are not properly soldered, so we'll fix them.
*Requirements: 2x JBC Soldering station with wide tip, proper thin solder (borrow one from Benadski)
+
|Procedure=
*What comes in: Badge-panels
+
|Requirements=
*What comes out: Badge-panels with better soldered audio jacks -> Depanelizing
+
* 2x JBC Soldering station with wide tip (borrow one from Benadski)
 +
* proper thin solder
 +
|In=
 +
* Badge-panels
 +
|Out=
 +
* Badge-panels with better soldered audio jacks -> Depanelizing
 +
}}
  
==Depanelizing==
+
{{SweatshopItem|Title=Depanelizing
*Requirements: tablemounted vice, pliers (combinatietang), trashcan
+
|Requirements=
*What comes in: badge-panels
+
* tablemounted vice, pliers (combinatietang), trashcan
*Procedure: Use vice to break side-rails off, use pliers to break tabs. Be careful not to scratch/damage/bend boards.
+
|In=
*What comes out: trays with Badges -> display mounting, waste -> trash
+
* badge-panels
 +
|Procedure=* Use vice to break side-rails off
 +
* use pliers to break tabs.  
 +
Be careful not to scratch/damage/bend boards.
 +
|Out=
 +
* trays with Badges -> display mounting
 +
* waste -> trash
 +
}}
  
==Display connecting==
+
{{SweatshopItem|Title=Display connecting
* Requirements: wooden picks
+
|Requirements=
* What comes in: trays with badges, trays with displays
+
* wooden picks
* Procedure: slightly bent flat-cable, pass through hole, open connector, insert cable, close connector
+
|In=
* What comes out: trays with badges with display
+
*trays with badges
 +
* trays with displays
 +
|Procedure= slightly bent flat-cable, pass through hole, open connector, insert cable, close connector
 +
|Out=
 +
*trays with badges with display
 +
}}
  
==Software==
+
{{SweatshopItem|Title=Software
* Requirements: laptops with software, USB cables and hubs
+
|Requirements=* laptops with software, USB cables and hubs
* What comes in: trays with badges with display
+
|In=*trays with badges with display
* Procedure: connect badge and wait until autotester appears, if final image shows: pass!
+
|Procedure=*connect badge and wait until autotester appears, if final image shows: pass!
* What comes out: trays with badges that pass -> mounting, trays with badges that fail -> rework
+
|Out=*trays with badges that pass -> mounting
 +
*trays with badges that fail -> rework
 +
}}
  
==Display Mounting==
+
{{SweatshopItem|Title=Display Mounting  
* Requirements: gluedot-gun, Alklanet, microfibercloth
+
|Requirements=* gluedot-gun, Alklanet, microfibercloth
* What comes in: trays with badges
+
|In=*trays with badges
* Procedure: degrease PCB and display, apply two gluedots on PCB, glue display on PCB
+
|Procedure=*degrease PCB and display, apply two gluedots on PCB, glue display on PCB
* What comes out: trays with badges with a mounted display -> Bagging
+
|Out=*trays with badges with a mounted display -> Bagging
 +
}}
  
==Bagging==
+
{{SweatshopItem|Title=Bagging
* Requirements: Heat-sealer, scissors
+
|Requirements=* Heat-sealer, scissors  
* What comes in: trays with badges with a mounted display, ESD bags
+
|In=*trays with badges with a mounted display, ESD bags
* Procedure: Three badges in bags, seal, cut into separate packs.
+
|Procedure=*Three badges in bags, seal, cut into separate packs.
* What comes out: badges in ESD bags -> Packing
+
|Out=*badges in ESD bags -> Packing
 +
}}
  
==Packing==
+
{{SweatshopItem|Title=Packing
* Requirements: Badge-kits, HackerHotel stickers, Sponsor Sticker, Revspace sticker, IR Receiver, empty SAMLA crate
+
|Requirements=* Badge-kits, HackerHotel stickers, Sponsor Sticker, Revspace sticker, IR Receiver, empty SAMLA crate
* What comes in: badges in ESD bags
+
|In=*badges in ESD bags
* Procedure: add badge, stickers and IR receiver to bag, deflate, ziplock, crate
+
|Procedure=* add badge, stickers and IR receiver to bag,
* What comes out: complete badge kits!
+
* deflate
 +
* ziplock
 +
* crate
 +
|Out=*complete badge kits!
 +
}}

Latest revision as of 16:26, 6 February 2019

Event[edit]

Saturday February 9 we will sweatshop 300 badges together :)

Location will be Revspace (The Hague) and we'll start at 13:00. We estimate everything should be done in approximately 2 hours, maybe even less. Maybe more when a crisis arrises ;)

People[edit]

  • Sebastius
  • Jnx
  • Renze
  • Tom + 1
  • Bugblue
  • Relocker
  • Obitoo
  • Jelle
  • Rowan8k
  • Maeddoc
  • Bef0re + 1
  • JanHenrik
  • Stegen

Stations[edit]

Unpacking[edit]

Requirements
  • Empty SAMLA for ESD bags
  • tray for boards
Procedure
What comes in
  • SAMLA boxes with badge-panels
What comes out
  • loose badge-panels on trays -> Soldering station,
  • bags -> Bagging station

Soldering AudioJacks[edit]

Audiojacks are not properly soldered, so we'll fix them.

Requirements
  • 2x JBC Soldering station with wide tip (borrow one from Benadski)
  • proper thin solder
Procedure
What comes in
  • Badge-panels
What comes out
  • Badge-panels with better soldered audio jacks -> Depanelizing

Depanelizing[edit]

Requirements
  • tablemounted vice, pliers (combinatietang), trashcan
Procedure
  • Use vice to break side-rails off
  • use pliers to break tabs.

Be careful not to scratch/damage/bend boards.

What comes in
  • badge-panels
What comes out
  • trays with Badges -> display mounting
  • waste -> trash

Display connecting[edit]

Requirements
  • wooden picks
Procedure

slightly bent flat-cable, pass through hole, open connector, insert cable, close connector

What comes in
  • trays with badges
  • trays with displays
What comes out
  • trays with badges with display

Software[edit]

Requirements
  • laptops with software, USB cables and hubs
Procedure
  • connect badge and wait until autotester appears, if final image shows: pass!
What comes in
  • trays with badges with display
What comes out
  • trays with badges that pass -> mounting
  • trays with badges that fail -> rework

Display Mounting[edit]

Requirements
  • gluedot-gun, Alklanet, microfibercloth
Procedure
  • degrease PCB and display, apply two gluedots on PCB, glue display on PCB
What comes in
  • trays with badges
What comes out
  • trays with badges with a mounted display -> Bagging

Bagging[edit]

Requirements
  • Heat-sealer, scissors
Procedure
  • Three badges in bags, seal, cut into separate packs.
What comes in
  • trays with badges with a mounted display, ESD bags
What comes out
  • badges in ESD bags -> Packing

Packing[edit]

Requirements
  • Badge-kits, HackerHotel stickers, Sponsor Sticker, Revspace sticker, IR Receiver, empty SAMLA crate
Procedure
  • add badge, stickers and IR receiver to bag,
  • deflate
  • ziplock
  • crate
What comes in
  • badges in ESD bags
What comes out
  • complete badge kits!