Difference between revisions of "HackerHotel2019Badge/Soldering"
Jump to navigation
Jump to search
(Created page with "bla") |
m |
||
| Line 1: | Line 1: | ||
| − | + | =Parts= | |
| + | [[File:IMG_2694.jpeg|400px]] | ||
| + | In the kit are from left to right: IR LED, IR Receiver, Shitty Addon Connector, Grove Connector, Motor | ||
| + | |||
| + | Well, we lied. the IR Receiver might not be in your kit. Please pick one up in the Badge Hacking Area. | ||
| + | |||
| + | =IR LED and Receiver= | ||
| + | |||
| + | [[https://wiki.badge.team/File:IMG_2703.jpeg|400px]] | ||
| + | IR LED should be on the front side. The IR LED is a polarized component so align the short leg of the LED with the flat side of the silkscreen drawing. | ||
| + | |||
| + | [[File:IMG 2704.jpeg|400px]] | ||
| + | The IR Receiver should be assembled as above. | ||
| + | |||
| + | =Shitty Addon Connector= | ||
| + | It's a square 4pin header. You'll figure it out ;) | ||
| + | |||
| + | =Grove connector= | ||
| + | [[File:IMG 2700.jpeg|400px]] | ||
| + | |||
| + | Grove connector goes on the board like this. Since the two pads for physical strength are not connected, please add some superglue for extra strength. | ||
Revision as of 01:56, 10 February 2019
Parts
In the kit are from left to right: IR LED, IR Receiver, Shitty Addon Connector, Grove Connector, Motor
Well, we lied. the IR Receiver might not be in your kit. Please pick one up in the Badge Hacking Area.
IR LED and Receiver
[[1]] IR LED should be on the front side. The IR LED is a polarized component so align the short leg of the LED with the flat side of the silkscreen drawing.
The IR Receiver should be assembled as above.
Shitty Addon Connector
It's a square 4pin header. You'll figure it out ;)
Grove connector
Grove connector goes on the board like this. Since the two pads for physical strength are not connected, please add some superglue for extra strength.
![[1]](https://wiki.badge.team/File:IMG_2703.jpeg%7C400px){kind=link}